COSMETIC PRODUCT PACKAGING EQUIPMENT

We provide solutions to the needs of the cosmetic sector by offering equipment totally adapted to the needs and formats of specific containers, complying with current quality standards. Gel fillers, cream fillers, shampoo fillers, personal hygiene product fillers, automatic filling lines for multi-format cosmetic products.  

Also in ATEX version.

MULTIFORMAT LINEAR PACKAGING MACHINE FOR COSMETIC PRODUCTS

PARÁMETROS TÉCNICOS PRINCIPALESDESCRIPCIÓN
CCG1000-TS high viscosity automatic filling machine is a new generation volumetric filling equipment, suitable for filling liquid into bottles. The whole machine has linear structure and is driven by servo motor system.
– Llenado volumétrico de la alta precisión.
– La regulación del volumen se realiza desde la pantalla táctil de la máquina.
- Capacity: from 4 FILLING NOZZLES TO 16 FILLING NOZZLES: from 1500 to 8000 bottles / hour.
- Applicable bottle size.
- Filling volume: 100ml-1L.
- Filling accuracy: (100ml) ± 1g, (1L) ± 2g.
- Air pressure: 0.6-0.8MPA.
- Power source: 380V, 50HZ.
- Power: 2.2KW.
- External dimension: 1995 × 1253 × 2250 mm (L * W * H).
- Weight: 680KG.

AUTOMATIC CAPPING MACHINE

DESCRIPCIÓNDETALLES
Automatic capping machine for cosmetic and other containers, adaptable to existing packaging lines.
The TECHMI Group TAF 40 capper is a simple, practical and efficient solution for the closure of various container formats.
-Specification: capping machine.
-Air pressure: 0.6 ~ 0.8 Mpa.
-Nominal voltage: 220V 50HZ.
-Power: 0,5 KW.
-Size: 700 mm x 350 mm x 720 mm (length x width x height).
-Machine weight: 80KG.
-Filling rate: 30/40 containers per minute.

AUTOMATIC LABELING SYSTEMS

DESCRIPCIÓNDETALLES
The HP300LC equipment is a labeling system for flat or elliptical containers, it is provided with a conveyor belt of 2.00m x 190mm approximate measures, the containers are aligned with side rails, 1 head of 8" high application. The equipment is managed by a PLC, in which the working parameters of the different products to be labeled are recorded. The equipment has an emergency stop. Estimated speed up to 120 products per minute, depending on the work with samples of containers and labels.
Wrapping module for cylindrical containers.
HP300 self-adhesive label applicator.
-Variable speed.
-Application system: By contact, synchronous.
-Positioning accuracy +/- 0.8 mm.
-Application speed: variable from 2 to 30 Mts/minute.
-Main functions: label stop, application delay, product counting, speed regulation.
-Minimum label size: 12mm x 12mm.
-Maximum label size: (8") 205 mm x 300 mm.
-Roll diameter 305 mm maximum, inside 76 mm (Optional 400 mm).
-Power supply: 220 V (+/- 10%) 50/60Hz (+/- 1%) Stepper motor - Roll diameter 305 mm maximum, inside 76 mm (Optional 400mm).
-Control: LCD display with all commands. 10 product memories.

METAL DETECTING EQUIPMENT

DESCRIPCIÓNCARACTERÍSTICAS PRINCIPALESDETALLES
Dynamic metal detector
Constructed of AISI 304L stainless steel and FDA grade rubber fabric band.
Easy operation.
After studying and checking the product, it allows you to save the parameters and adjust the saved recipe with a single keystroke.
Container discarder with warning sensor.
- Simultaneous Multi-Frequency Operation
- Broad Spectrum Frequency Transmission
- ARM Processors: Multi-Channel Signal Processing
- 100% Increase in Detection Sensitivity
- Noise Immune Structure
- One-Step Product Learning
- Automatic Product Tracing
Contact Reporter Software Included
-Air pressure: 0,6 ~ 0,8 Mpa
-Nominal voltage: 220V 50HZ
-Power: 0.5 KW
-Size: 1500 mm x 1300 mm x 850 mm (length x width x height).
-Machine weight: 120KG.
-Filling rate: 30/80 packs per minute

AUTOMATIC CAP FEEDER


The cap feeder is a system where the caps are deposited in bulk in a hopper and are lifted and accommodated by an automatic selector that feeds them directly to the cap placer through a down chute. The structure of the cap feeder is made entirely of AISI 304 stainless steel. The speed of the feeding belt is controlled by means of an electronic speed variator. The system has an optical sensor that determines the flow rate of caps to be supplied and starts and stops the feeder automatically.

We have selectors for all types of screw-on or snap-on caps, plastic, wood or metal.

LINEAR CONTAINER FEEDER

DESCRIPCIÓNDETALLES
The linear feeder for jars, drums and bottles.
The linear container feeder is a system where the containers are deposited on a conveyor belt system that generates a back and forth movement feeding the containers smoothly into the machine or production line. The structure of the container feeder is made entirely of AISI 304 stainless steel. The speed of the feeding belt is controlled by means of an electronic speed variator. The system has an optical sensor that determines the flow rate of containers to be supplied and is responsible for starting and stopping the feeder automatically.
The feeder is large enough to discharge a layer of pallet containers.
-Nominal voltage: 220V 50HZ.
-Power: 0,5 KW.
-Size: 1500 mm x 1300 mm x 850 mm (length x width x height).
-Machine weight: 120KG.
-Filling rate: 20/120 containers per minute.

CONTAINER FEEDER PLATE

PARÁMETROS TÉCNICOS PRINCIPALESDESCRIPCIÓN
-Nominal voltage: 220V 50HZ
-Power: 0.5 KW
-Size: 800 mm x 800 mm x 850 mm (length x width x height).
-Machine weight: 120KG.
-Filling rate: 20/120 containers per minute
The rotary container feeder is a turntable system where the containers are manually deposited and gently fed to the container infeed of the machine or production line. They are also used at the end of lines for the accumulation of finished product or in intermediate systems such as the lungs of production lines.
The structure of the container feeder is made entirely of AISI 304 stainless steel. The speed of the feeder plate is controlled by means of an electronic speed variator. The system has an optical sensor that determines the flow rate of containers to be supplied and automatically starts and stops the feeder.

+34 611054935

+34 695208399

clientes@techmigroup.com

info@techmigroup.com

ASIA

Industrial plant

Yangang Mid Road, Jintan City, Jiangsu Province, China, ppost code: 213200

EUROPE

Commercial office

Calle de las reinas 3, 46901, Torrente, Valencia, España

LATINOAMÉRICA

Technical office

Av San Martin 0123, C.P. 3013, San Carlos, Santa Fe, Argentina

www.techmigroup.com